GC Home | Register | Shop | Learn | Business | Around Town | Info
Let the world know you love to sew with two
custom metallic iron-on designs. They're fast, fun and easy to apply. Just peel
off the protective paper (the glue-backed dots will remain positioned against
the sticky paper).
Position the design (you'll be able to see the design through the clear sticky paper). Adjust if necessary, then cover with a press cloth and press, using a dry iron at a temperature setting compatible to your fabric. Let the area cool before moving. Once they're set, these designs are washable (air dry) or dry cleanable.
Use the sewing machine motif on a denim jumper bib or use both designs on a sweatshirt jacket.
Materials Needed:
-- One pre-washed pullover sweatshirt
--1/2 yard of sewing print fabric
--Two strips of fusible interfacing 2" wide x center front sweatshirt
measurement, plus 1"
--One press-on sewing machine design
--One sheet sewing designs, cut apart
Preparing Sweatshirt:
--Cut the sweatshirt up the center front
--Cut two fabric strips 4" wide x center front sweatshirt measurement, plus
1"
--Fuse interfacing strips to the wrong side of each fabric strip, matching one
lengthwise raw edge
--Stitch the interfaced fabric strip edge to the center front cut edges of the
sweatshirt, turning under remaining raw edges to finish
--Press metallic iron-on designs on sweatshirt as desired and frame each design
with fabric strip appliqués
More information on Total Embellishments
Back to the Get Creative! Conference Center
Back to Meet the Get Creative! Experts
